1:18 scale Catalina a long, lean hot rod …
Ah, the Catalina. The name alone seemed exotic and somehow a bit sexy in the 1960s. But that was during a time when cars had names that stirred imaginations and were not just known by a collection of numbers or letters.
Pontiac was rife with great names during its long run, Bonneville, Firebird, Chieftain, Parisienne, Ventura, Silver Streak, Tempest, Star Chief, and Le Mans, to name a few.
Catalina was a big player and the name hung around for years. Now Auto World creates a 1961 version of the hardtop model and it’s up to AW’s usual fine standards.
It wasn’t until 1959 that the Catalina was offered as its own standalone model, basically a low-cost starter Pontiac if you will. But it was restyled for 1961 and placed on an all-new frame known as the Torque Box. Sounds like it should be fast, right? That replaced the old X frame and one could argue this is when Pontiacs starting becoming lower, longer and wider. Remember the old advertising line, “wide-track Pontiacs?”
For 1961 Pontiac went with the lean long look that it stuck with for years, think Bonneville and Parisienne! The roofs also were squared off and the split grille returned and remained a styling cue for years. That included a somewhat pointed nose and hood. I always thought the split grille as cool as a BMW nose. But then I liked Edsels too.
Naturally speed was vital to car sales in the 1960s and Pontiac and Oldsmobile also were well regarded for their race results in the new burgeoning NASCAR series.
Catalina featured a number of V8 power plants, all based off its 389 cu.in. engine (modeled here) and linked to various transmissions, including manual ones with floor-mounted shifters. There was a four-barrel carb model creating 333 horsepower, plus a Tri-Power option with higher compression to make 348 horses, and another for drag racers with 363 horses. Near the end of 1961 a dealer-installed 421 cu.in. Super Duty V8 became available too.
For the record these big boys rode on a 119-inch wheelbase and were 210 inches long. Think current SUVs. Six styles were offered, including a convertible and station wagon. AW models the 2-door hardtop, which looks a little sportier with no B-pillar.
At auction today the average sale price of a ’61 Catalina is a little more than $39,000, but a perfect one, the auction sites say, could go for $99 grand.
As with other AW 1:18 die-cast models the doors, hood and trunk open and the somewhat sparkly Richmond Gray is perfectly applied.
One of the features that shines on all these 1950s and 1960s models is the chrome as the bumpers, window trim, wiper arms, radio antenna, door handles and the styling accent strip on the car are chrome. The nose and tail Pontiac emblems are well executed and Oldsmobile is spelled out on the rear panel below the 3-body trunk and between the snazzy red oval taillights with silver trim.
Headlights are clear, but textured and the grille silver with black between the strakes for definition. Oh, and there are those little chrome winglets that extend vertically from the front fenders. Fun!
Under that massive hood is a turquoise to baby blue V8 engine block and headers, three chrome carbs and plenty of black wiring and plumbing. The radiator cap and battery terminals are painted silver and there’s a caution label on the protrusion over the fan.
Tires are treaded white sidewalls with no branding and at least one of the tires whitewalls was misprinted slightly. Matte chrome hubcaps feature a flat center cap with Pontiac Motor Division printed on it.
Inside the interior here is a somewhat sparkling rusty red with white door trim panels and stripes across the seat backs, adding flamboyance to the big two-door’s interior. There’s also a cue-ball shifter on the center console, a chrome and red two-stalk steering wheel with chrome horn ring and three black pedals (including a clutch) on the floor. AW finished off the floor with a medium brown flocking to look like carpet and a rust-colored floor mat for the driver.
The dash is Grand Canyon wide and features a silver center portion with wide black and white speedometer, a radio and Catalina printed on the passenger-side dash. Buttons are silver and the door release levers and window knobs are chrome, plus the rear seat armrests include silver ashtrays.
Catalina’s undercarriage is completely detailed too with fine drivetrain and suspension detailing including shocks. Plus there’s a matte silver twin exhaust system and mufflers along with steerable front wheels. Nice detail that even pricier composite models often skip entirely.
All this and pricing still in the $115 range while the composites have grown to upwards of $200, or more if there’s a detailed engine. AW’s die-cast remains high value at an affordable price.
Just a final note that AW made a 1962 Catalina previously and it’s still available through the AW online store, autoworldstore.com.
Vital Stats: 1961 Pontiac Catalina
Maker: Auto World
Stock No.: AM1254/06
2 thoughts on “Diecast: Auto World 1961 Pontiac Catalina Hardtop”
Right, it was around a while!
1959 was the beginning of Pontiac’s Wide Track advertising theme..
LikeLiked by 1 person