Tag Archives: Plymouth Barracuda

Car Spot: 1970 Plymouth Barracuda

A car from the golden age of muscle cars

If you’ve read any of my posts, you know that I love cars with big V8 engines, especially the ones from the late 1960s and early 1970s. Of course, my dad having worked for American Motors, I’m partial to AMXs and Javelins, but I love them all like this week’s spot, a 1970 Barracuda.

I see all kinds of cool cars like this in the parking lot of Ironwood Golf Course where I work during the summer.

Like the AMC Gremlin, it debuted on April Fool’s Day, but in 1964. Plymouth took a page out of Ford’s book, speeding up development time and keeping costs low by using the Ford Falcon, but in this case, the Cuda was based on Chrysler’s A-body Valiant.

This was the beginning of the pony car era, started by the Mustang, but soon after joined by the Camero, Firebird, Cuda, and Challenger.

RELATED Spot: Muscle cars made a comeback with the Dodge Viper

The new model used the Valiant’s 106-inch wheelbase along with the Valiant hood, headlamp bezels, windshield, vent windows, quarter panels, doors, A-pillar, and bumpers. Only the trunk and some of the glass were new. It wasn’t until the third generation, debuting in 1970, that anything left over from the Valiant was finally gone.

plymouth barracuda, cuda, pony cars

Consisting of coupe and convertible models, the all-new Cuda was built on a shorter, wider version of Chrysler’s existing B platform, the E-body. Dodge saw an opportunity and launched the Challenger and although it shared the same platform there were differences. They shared no exterior sheet metal and the Challenger, at 110 inches, had a wheelbase that was two inches longer, and a body five inches longer than the Barracuda’s.

plymouth barracuda, cuda, cuda 340
This fish could fly with all those ponies.

Buyers had a choice of ten engines (image that) ranging from the base slant six all the way up to two 440s. Now you’d be lucky if you had two options.

340 Six Pack340ci3x2bbl290 hp @ 5000 rpm345 lb-ft @ 3400 rpm
340340ci1x4bbl275 hp @ 5000 rpm340 lb-ft @ 3200 rpm
383383ci1x4bbl330 hp @ 5000 rpm425 lb-ft @ 3200 rpm
383383ci1x2bbl290 hp @ 4400 rpm390 lb-ft @ 2800 rpm
426 Hemi426ci2x4bbl425 hp @ 5000 rpm490 lb-ft @ 4000 rpm
440 Six Pack440ci3x2bbl390 hp @ 4700 rpm490 lb-ft @ 3200 rpm
440440ci1x4bbl375 hp @ 4600 rpm480 lb-ft @ 3200 rpm

According to TopSpeed.com, a Cuda mated to either a four-speed manual or a three-speed TorqueFlite automatic, with a 426 HEMI got from 0 to 60 mph in only 5.8 seconds, the 0-to-100-mph sprint stood at 13 seconds, while top speed was rated at 117 mph. On the quarter-mile strip, the HEMI Cuda was one of the fastest muscle cars available, needing only 14 seconds to complete the run.

RELATED Spot: See its older cousin given a second chance, 67 Dodge Charger Restomod.

cuda, plymouth barracuda
pony cars
This Cuda looks fast even parked.
plymouth barracuda, cuda
pony cars
This Cuda had the total package with a 4-speed.

So what are they worth now?

1970 was the best year in sales with 55,499 Barracudas sold, 25,651 base Hardtops, 1,554 base Convertibles, 18,880 ’Cuda Hardtops, 635 ’Cuda Convertibles, and 2,724 AAR ’Cudas. Obviously, the droptops command the most.

In 2015 a 1970 Plymouth Hemi Cuda convertible, one of just 14 produced, sold at auction for $2.5 million bucks but ones like this week’s spot are much more affordable. According to Hagerty, one in Fair condition will fetch just over $45,000, Good condition, $54,000, Excellent, $74,500, and $92, 200 all very reasonable prices for a piece of American automotive history. Because of the energy crisis in 1973, the end of the line for Cuda came in 1974.

75 Cuda Concept. Photo Source: Hot Rod

But before that, this really cool concept had been produced featuring a Superbird-inspired aerodynamic body and it came close to being built. According to the website Chrome Fin Restorations, the prototype was taken to Cincinnati to be viewed by a consumer group for feedback and the results weren’t great, they weren’t even good.

“That wild body went to Cincinnati of all places, and it was a disaster,” remembers designer Milt Antonick. “I came back from Cincinnati and realized it was all over; management didn’t want muscle cars anymore. It was the saddest day of my career at Chrysler.” This would have easily rocked anything else in the market!

It’s really sad that the pony car era, which came back in 2008, is riding off into the sunset again with the emphasis on cars going green. Certainly electric cars with their fake ICE sounds will never replace the excitement and rumble of these cars.

Thanks for stopping by and be sure to check back next Friday for another one of my car spots along with some history behind it. Have a great weekend.

#Plymouth

#Barracuda

#Muscle Cars

Advertisement

Chasing Classic Cars: You find them when you least expect them

A car show at an air show

Car shows, classic cars, plymouth, mercury, chevy, pontiac covnertibleSo this past weekend, I was up with my buddies in Oconto, WI putting on an airshow with our radio controlled airplanes. Our gig was actually just part of a bigger event they held at their local airport. Well one of the other parts was a classic car show. I saw the shiny bright objects right away and when I was in between flights took a walk over. All kinds of cool cars and they pictures I’m sharing here are just a sample of the cars there.

A 1970 Mercury Cougar Eliminator

The Cougar was Motor Trend magazine’s Car of the Year for 1967 and helped Mercury sales quite a bit when it was introduced in 1967. A Mustang twin? Well sort of except that unlike a lot of other cars built on the same platform that make minor changes, Mercury did a lot. This with the Eliminator package was high performance. The owner wasn’t around but if it had a 427 in it, would be worth some serious cash.

, chevy, pontiac covnertible, chevy, pontiac covnertible

The Duster everybody wants

There basic model was kind of…eh. It was built for economy and they don’t have a lot of value to collectors, however this one with the 440 is and are very affordable muscle cars. I found one on Hemming’s for around $15 grand. Not a lot of dough for a very fast car.

, chevy, pontiac covnertible, chevy, pontiac covnertible

OOOOOOh…Barrracuda

The Plymouth Barracuda was a two-door car that was manufactured by the Plymouth division of the Chrysler Corporation from 1964 to 1974. This is a third-gen Cuda and the redesign for the removed all its previous commonality with the Valiant. I love the color treatment on this one.

cuda-front, chevy, pontiac covnertible

A rare Firebird

This is a first-gen made from 67-69. I believe this is a 68 and what makes it rare it the 440 and its a convertible. Hemming’s trend guide showed that it would go for about $117,000.

, chevy, pontiac covnertible, chevy, pontiac covnertible

The classics of classics

This 1957 Chevy convertible was pretty cool. I also love the drive in touch. Depending on the package it had pricing goes up to $120,000. What’s not to like about a car show? Two of my loves, cars and planes.

, chevy, pontiac covnertible, chevy, pontiac covnertible, chevy, pontiac covnertible

Plymouth Barracuda: They were going to name it what?

1964 Plymouth Valiant Barracuda (USA)

It could have been named something else

From the what were they thinking category. Plymouth’s executives had wanted to name the car Panda, an idea that was unpopular with the car’s designers. Well duh, you think? In the end however the person who came up with the name was locked in a closet or ???? and the, suggestion of Barracuda was selected. Panda???? Can you imagine a guy showing up at a drag strip with a Hemi Panda? Geesh, that would be wrong. Continue reading Plymouth Barracuda: They were going to name it what?