Tag Archives: Motorcraft

1981 Mazda RX-7

Johnny Lightning creates a racy tribute with new Mazda RX-7 …

Mazda has been a favorite car maker of mine since I was fresh out of college and bought a GLC hatchback. Remember the Great Little Car?

Well, it wasn’t great, but it was good and low-priced, which fit a newly minted college graduate’s budget. Plus it was crazy reliable, with a manual choke, so it ALWAYS started.

Just as I was dipping my toes into the car market Mazda was expanding its lineup to include the racy Wankel rotary engine-powered RX-7. You might say it was Mazda’s prescription for speed, helping solidify its sporty image for years to come. Mazda even raced the RX-7, challenging Nissan’s 240Z.

This Johnny Lightning beauty at just 1:64 scale is a tribute to Mazda’s first racer, featuring its markings, but the body work of the 1981-‘85 RX-7s. It’s sharp and moves JL up another notch in fit and finish for the small die-cast market where it leads in realism, especially in the muscle car realm. This is muscle of a different sort though.

The History

Mazda introduced the RX-7 as a 1979 model, replacing the RX-3, which was decidedly less sporty looking. The Wankel rotary engine and the car’s low-slung long-hood design were the big news. The RX-7 was small and light enough to avoid some Japanese road taxes too, making it a popular model from an economic standpoint too. Plus the new engine packed more power.

Mazda, who had raced the RX-3, was quick to get the RX-7 into racing and in 1979 finished first and second in the GTU class at the Daytona 24 Hours, and were fifth and sixth overall, a pretty impressive start. Later in the year the Mazda also won the 24 Hours of Spa in Belgium, although those cars had been tweaked and tuned by the Tom Walkinshaw (TWR) racing team.

In fact, RX-7s won the GTU championship in IMSA eight straight years, from 1980 to 1987, often taking the top two or three spots. Ultimately it won more IMSA races than any other car.

Those racers also had rear a rear spoiler and wide over fenders along with a chin spoiler. The Johnny Lightning car is based on the FB version of the RX-7, which came a bit after the original. This is a street version, which means they have no spoilers, but the 1981 FB models now had integrated plastic-covered bumpers, wide black rubber body side moldings, and wraparound taillights. Engine controls also were upgraded. 

The Model

               This new casting, which retails for just $12.99, uses the two-tone green markings over a creamy white that the original RX-7 sported in the Daytona endurance race. There are big black No. 7s enclosed in black circles on the hood and doors, plus Mazda is printed big on the nose and in a blue bar across the top of the windshield.

               On the rear hatch’s lid is a “Powered by Rotary” decal and there are Union 76 and Bridgestone logos on the rear quarter panels. Another Mazda decal is on the fenders just before the doors, and a circular orange NGK spark plugs decal on each door.

               The FB’s large black side moldings are here, just above the two-tone green stripes along the car’s lower edges.

               Details that make the car look particularly realistic even in this small scale are black door handles, dual black side mirrors with silver faces and black hinges on the rear windscreen, plus a large black wiper at its lower edge. The rollaway headlights are shut to give the car a racier and smoother look, plus the hood opens forward, as on the original.

               Under the hood is a black engine block, but it is flat as was the rotary in the RX-7s, just a blue air filter on top for a little color. The rest of the cast-in details are white under the hood, which does take a bit of effort to pry open the first time. I scratched a tiny bit of paint off, but then this is a race car, so what’s a little race wear? The hood fits beautifully when closed.

               Of course the undercarriage is cast in great detail, as on all JL and Auto World models. Plus the black radiator air intake panel under the nose is nicely detailed.

               But the final bit of fun here are the wheels, which are four twin-spokes each with the spokes being a copper-gold, similar to some models sold in the U.S. that featured gold-anodized wheels. Plus the tires are rubber on JL cars. Bravo!

               A quick note here to call out our Auto World friend, Chad Reid, as the graphic artist on this model, along with a new red Motorcraft Ranger parts truck. The truck uses a Motorcraft logo on each door with a two white and one black stripe down each side as accents. It looks sharp and you can imagine one of these pulling into your repair shop’s parking lot, circa 1983.

 Reid says he chose Motorcraft red for the truck as it seemed perfect for a parts truck, and he also drew on a old Nylint Ford Ranger’s markings for inspiration. Both the Motorcraft Ranger (also $12.99) and RX-7 are limited editions, with just 2,496 being made of each.

The Ranger is a pre-order with shipments expected soon, but the RX-7 is in stock now.              

Vital Stats: 1981 Mazda RX-7 (racer tribute)

Maker: Johnny Lightning
Scale: 1/64
Stock No.: SCM099
MSRP: $12.99

Link: Autoworldstore.com