Tag Archives: 1967 Indy 500

Die-cast: Autoart’s McLaren Senna

Beautiful Senna model designed for speed, car lust …

If beauty be only skin deep, so be it, especially if that object of visual lust is a mid-engine McLaren Senna, be it a throbbing full-size version or a silent 1:18 scale model snug in a showcase.

Autoart has an encyclopedic knowledge of beauty and sensuous supercar lines and it’s not afraid to use it to create products of automotive amore. Its current 11 on a scale of 10 is the Trophy Mira (orange for us neophytes) McLaren Senna, which is based on the studly McLaren 720S, not a bad place to start.

The History

Formula 1 fanatics are fully aware of both McLaren and Senna, as in Ayrton Senna, the three-time F1 World Driving Champion, who as luck would have it, won all his titles driving for the McLaren F1 team. The Brazilian was often touted as the best F1 driver ever, but certainly of the late 1980s to 1994 when he was killed in the San Marino Grand Prix, driving not a McLaren, but a Williams F1 car.

McLaren holds exclusive rights to the Senna name for automobiles and that moniker is money in the bank for prestige, even 25+ years after Senna’s death.

Of course any McLaren supercar would live up to the Senna reputation for speed, but this model was designed to be extremely light to set faster times than previous models, so racy on its face. It touts a 4.0-liter twin-turbo V8 that makes 789 horsepower while using a 7-speed dual-clutch transmission. Weight is a miniscule 3,029 pounds. Thrust? McLaren claims 0-60 mph in 2.8 seconds, a 9.9 second quarter mile. You get the picture.

To keep it light there’s a carbon fiber monocoque chassis and to insure it’s stuck to the ground at 211 mph, its top speed, McLaren melds a double-element rear wing to its tail. In addition to downforce it also acts as an air brake (remember that on the 1967 Indy STP Turbine?) The wing is slightly adjustable even on Autoart’s model.

Up on the roof is a prominent air scoop, plus giant side air intakes to keep the engine and brakes cool at race speeds. Then there are the dihedral doors that fold up to allow the driver and a daring passenger to slip inside, and then windows set within the side windows, again for aero purposes. Folks of a certain age will remember similar windows on the racy 1990s Subaru SVX.

And if you have to ask, yes there are Brembo carbon ceramic brakes, and all for just a smidge over $1 million, asking price. Just 500 Sennas were to be made, the first delivered in 2018 and they don’t make them quickly at McLaren’s plant in Woking, Surrey, England.

The Model

               Autoart on the other hand has created five color variations of the Senna — blue, gray, black, white, and this glorious nearly glow-in-the-dark metallic orange. Seeing as how McLaren’s early racers were all a bright papaya orange, this seems the most appropriate color and with its black cockpit area, rear wing, chin spoiler, ground effects trim and rear diffuser, plus gloss black wheels the overall visual can leave one gobsmacked.

               All that black trim, nose to tail, around the inset thin lights, the nose before the cockpit and panels beneath the wing’s struts are mock carbon fiber patterned to resemble the real deal. A small rectangular McLaren nameplate graces the sleek nose and even the side mirror housings resemble carbon fiber.

               Roof and window trim are all gloss piano black with all the proper seams and outlines of the door hinges, those inserted side windows within windows, and the clear panels above each seat. There also are clear inserts in the doors, again trimmed in black gloss. In theory, one could see the driver and passenger’s legs through those panels.

               Inside the massive side air scoops are black mesh screens and then tiny carbon fiber aero devices like Gurney flaps on the inner edges of the rear fenders to direct air up to that monster two-tier rear wing.

               Through the octagonal rear hatch window one can see the top of the twin-turbo V8, just enough to not feel cheated that the rear bonnet doesn’t open. Go all the way to the tail and there’s a six-sided black opening under the wing with what would be a trio of black titanium exhaust pipes. Imagine their rich exhaust tone on that million dollar baby.

               Below that is more black mesh grillework on the tail, a McLaren nameplate and the black multi-finned diffuser. A joint McLaren/Senna plate also labels the rear, where a license might go if you were using your Senna on the street, not just the track.

               Wheels are gloss black with a McLaren swish logo on the hub and enormous drilled disc brakes behind with blue calipers. Tires are thick treaded rubber properly labeled Pirelli P-Zeros, so you know they were designed for maximum adhesion.

               Senna’s interior is easy to view and easy on the eyes as you flip up the dihedral doors. The door frame reinforces the fact the McLaren has a carbon fiber cockpit with another McLaren nameplate and logo on the bottom of the frame. Seats are a soft black plastic to somewhat mimic the Alcantara leather seats of the street machine.

               Autoart nails the dash detail too with carbon fiber touches, chrome air vents, a flat-bottom three-spoke race steering wheel and a big vertical screen aimed at the driver for ease of use. The model features black cloth seatbelts with metal clasps to further aid realism and yes, there’s a Senna logo on the passenger-side dash.

               Short of working lights and engine this is as close to a perfect recreation of one of the most beautiful cars in the world. Yet even at $260 it’s much more affordable for your collection than plunking down for a 1:1 scale, even if it were slightly used and needed new tires. You know it would.  

Vital Stats: McLaren Senna (Trophy Mira/Orange)

The wing flattened out.

Maker: Autoart
Scale: 1/18
Stock No.: 76078
MSRP: $260

The wing slightly angled.

Link: Autoartmodels.com

Die-cast: Replicarz’s 1967 Paxton (STP) Turbine

STP’s 1967 Indy 500 Turbine is a sure winner this time!

Replicarz 1967 Indy 500 Paxton Turbine Indianapolis 500 Parnelli Jones STP Andy Granatelli, Silent Sam
Replicarz nails the iconic STP turbine that Parnelli Jones nearly drove to victory in the 1967 Indy 500.

Say turbine car and Indianapolis 500 and most car lovers and race fans will picture the 1967 STP-sponsored day-glo red racer that Parnelli Jones darned near drove to victory that year.

It was nicknamed Silent Sam and the Whooshmobile for its turbine power that sounded like a jet whooshing by at 160+ mph while all the other Indy racers grumbled and roared with their internal combustion engines. The car set the racing world on edge, threatened the establishment and yet was a fan favorite.

While a plastic model was made of the car almost immediately at the time, Replicarz now is the first diecast car maker to deliver a high-quality detailed 1/18 scale version of the car Jones drove to within 4 laps of an Indy win. It took a while, but the wait was worth it. And the Indy icon appears just as the Indianapolis 500 is set to run its 100th race this May. Timing could hardly be better.

The History

The STP-Paxton turbine was the brainchild of designer Ken Wallis and Andy Granatelli, a former racer and then head of STP, a division of Studebaker Corp. Granatelli had championed the powerful Novi racer for years and always was looking for an advantage to help him win the Indy 500. Replicarz 1967 Indy 500 Paxton Turbine Silent Sam, Parnelli JonesThat led him to buy Ferguson Formula 4-wheel-drive to first team with the Novi engine and for 1967, Wallis’ turbine power, a Pratt & Whitney Canada ST6B-62 turbine. It ran in a space frame chassis with the turbine mounted on the left side of the chassis while the driver’s cockpit was alongside on the right. Continue reading Die-cast: Replicarz’s 1967 Paxton (STP) Turbine