Replicarz 1964 Cheetah

Die-cast: Replicarz 1964 Cheetah

 

Silver Cheetah a muscular winner in 1/18 scale  …Replicarz 1964 Cheetah

Hard as it is to imagine, the funky Cheetah sports car has never been reproduced in 1/18 scale, at least not this stunning silver version that Replicarz has chosen to make as part of its Sports Car series.

This sealed body cast-resin model highlights the Cheetah’s truncated rear end and long muscular hood with air filter cover and giant wheels under its bulging fenders.

The History

This one is the 1964 Cheetah in Team Clarence Dixon Cadillac exactly as it was when Mike Jones drove the car in the L.A. Times Grand Prix at Riverside. Only 10 Cheetahs were made, all but the first two with Fiberglas bodies.Replicarz 1964 Cheetah

Originally designer and Chevrolet specialty car builder and tuner Bill Thomas dreamed up the Cheetah along with fabricator, designer and Indy 500 driver Don Edmunds with some backing from Chevrolet. They were hoping to challenge the successful Shelby Cobra at the time.

Legend has it that Edmunds laid all the parts, many from Chevy, on the shop floor and drew up the chassis right there with chalk on the floor. Originally this was to be a sporty cruiser, but soon became a racer. The first two were made of aluminum until several accidents, then Fiberglas bodies were created.Replicarz 1964 Cheetah

The chassis was chromoly tubing with the engine placed way back in the chassis to better balance the racer, like a mid-engine (rear-engined) race car. One issue was too much heat under the massive hood, causing engine failures. Drivers also complained of the heat in the cockpit as exhaust heads went over the tops of drivers’ legs. Ouch!

The cars were raced a lot in the early- to mid-1960s and one appeared in an Elvis Presley movie, Spinout. The modeled No. 33 with Dixon Cadillac livery was, according to Barrett-Jackson Auctions, originally ordered by Jack Goodman who owned the Caddy dealership. It reportedly is the only Cheetah to sport, and race, Corvette’s 427 cid L88 aluminum head racing engine.

It was eventually sold to James Phillips who won the 1968 A/SR championship for the Southern Pacific region of the SCCA. The car raced for five years and was originally ordered in Corvette Sebring Silver with a black interior, which it still has.

The ModelReplicarz 1964 Cheetah

What we reviewed was a near production model that is stunning in appearance with all the correct labeling of the 1964 race model with a beautifully detailed body. I love this matte metallic finish, really spectacular!

There are rivet indentations for the overhead door hinges and around the large rear window. Petit door handles are at the bottom of what were basically gullwing doors. Two gas caps sprout in front of the cockpit on either side of the car and there is another below the rear window. Huge holes are carved in the hood to cool its Vette engine, while inside that hood you see two huge radiators and fans to further aid in cool a powerplant that frequently overheated.

A reversed hood scoop sits middle of the hood and we’re told the air cleaner under that will be 3mm larger on the production model and the hood vent will be magnetic, to keep it firmly in place. Under the air cleaner of course is the Corvette engine block and red wiring harness.Replicarz 1964 Cheetah

Tires are all treaded with huge rear tires that fill the wheel wells and the wheels are different front and rear. Fronts are 5-spoke with blackened spokes while the rears are plain silver with five molded-in bolts to hold them on.

Headlights are housed inside large protective lenses common in the day and there are four circular red taillights in back. Front and rear there also is a handsome red, white and blue Cheetah logo with a yellow cheetah as the mascot.

The cockpit features black and red seats with nicely detailed shoulder and lap belts. The dash is well detailed with all the appropriate gauges with detailed faces. A racy silver 3-spoke steering wheel also is in there and a gear shift lever on the transmission tunnel and inside the back window, a huge spare front tire.Replicarz 1964 Cheetah

The Cheetah, while not always a winner on track, is a winner in die-cast resin. Can’t wait to see the final production version.

Vital Stats: 1964 Cheetah, Team Dixon Cadillac, Riverside, Mike Jones

Maker: Replicarz
Scale: 1/18
Stock No.: R18903
MSRP: $249.99Replicarz 1964 Cheetah

Link: Replicarz.com

 

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.